Stagg SDM50 GD Dynamic Vocal And Instrument Microphone Gold
£19.99 Inc. Vat
Professional cardioid dynamic microphone Gold special edition
Uses: Vocal and instrumental
Cartridge: DC78, moving coil
Polar pattern: Cardioid
Sensitivity: – 54 dB +/- 3 dB (0 dB = 1 V / Pa at 1 KHz)
Frequency response: 50 Hz to 15 KHz
Output impedance: 600 ohms 30 % (at 1 KHz)
Connector: Balanced XLR output
Body: Zinc alloy
Included: Mic clip
Protection box: Plastic
Colour: textured gold
1 in stock
Professional cardioid dynamic microphone Gold special edition
Uses: Vocal and instrumental
Cartridge: DC78, moving coil
Polar pattern: Cardioid
Sensitivity: – 54 dB +/- 3 dB (0 dB = 1 V / Pa at 1 KHz)
Frequency response: 50 Hz to 15 KHz
Output impedance: 600 ohms 30 % (at 1 KHz)
Connector: Balanced XLR output
Body: Zinc alloy
Included: Mic clip
Protection box: Plastic
Colour: textured gold
| Weight | 0.925 kg |
|---|
Only logged in customers who have purchased this product may leave a review.
Related products
D’Addario PW-MS-25 Custom Series Swivel XLR Microphone Cable, 25 feet
Custom Series Microphone Cable
Planet Waves Custom Series microphone cables feature gold plated connectors for superior signal flow and corrosion resistance. A patented swivel XLR plug easily fits in tight coffin cases and racks.
Patented swivel XLR plug easily fits in tight coffin cases and racks
In=Out Technology: Low capacitance for pure signal transparency
24k gold-plated plugs provide superior signal flow and corrosion resistance
Two layers of shielding provide noise rejection for quiet operation
PW-MS-25 Custom Series Swivel XLR Microphone Cable, 25 feet
Stagg Dynamic Vocal Microphone 50″ Style SDMP40 CR
Multipurpose 50s style cardioid dynamic microphone
Uses: Vocal and instrumental
Cartridge: DC66, moving coil
Polar pattern: Cardioid
Sensitivity: – 53 dB +/- 3 dB (0 dB = 1 V / Pa at 1 KHz)
Frequency response: 40 Hz to 12 KHz
Output impedance: 300 ohms 30 % (at 1 KHz)
Connector: XLR output
Body: Plastic
Cable: 3.5 m (11′), XLR to phone plug 6.35 mm (1/4″)
Switch: On / off
Colour: Chrome
Weight: 264 g (0.58 lb)
Comes with: Microphone holder with thread adapter (5/8″ to 3/8″)
Vic Firth Bluetooth Isolation Headphones VXHP0012
The Vic Firth Bluetooth Isolation Headphones are high-quality stereo headphones, which reduce outside noise levels so you can tune into the music. Offering superb stereo sound, these wireless headphones provide a full and tight low end, clean midrange and clear high end. Perfect for live, studio or practice, the broad foam cushions provide maximum comfort for any use. The 500mA built-in rechargeable battery provides approximately 20 hours of use. Using Bluetooth technology, these headphones connect wirelessly to enabled devices, and include a 3.5mm cable and 1/4in adapter for optional wired usage. These are the ideal headphones for any drummer looking for reliable, high-quality hearing protection.
SPECIFICATIONS
Weight
Approx. 55g
Speaker Type
50mm Dynamic Speaker Mylarcon
Impedance
32 ohm +/- 15%
Microphone
Condenser Microphone
Sound Pressure Level
112db +/- 3 db (1mw at 1kHZ)
Normal Rated Power
20mw
Max Power
30mw
Frequency Response
20HZ - 20KHZ
Cables
150cm +/- detachable with 3.5mm line-in cable and 14" adapter
Bluetooth Chip
5.0
Latency Value
250ms
Battery
500mA built-in rechargeable battery
Battery Life
20 working hours (approx.)
Reviews
There are no reviews yet.