MOOER, one of the world's leading guitar pedal innovators, has never been a stranger to octave pedals. The company has already enjoyed a successful response to its "Pure" and "Purer" Octave pedals, but the company's latest offering, the Tender Octaver X2, aims to take guitar octave capabilities to the next level.


Unlike the Pure and Purer Octave pedals which focus on pitch-shifting by the semitone, the Tender Octaver X2 is designed with a more specialized intention, focussing solely on octave shifts. When using the pedal, users can choose between two different octave shift modes, facilitating the addition of both subjacent and upper frequencies to a guitar signal. Both options have two dedicated rotatable dials, one for determining the volume of the added octave, and one for fine-tuning its tonal colour.


Both of these octave effects can be used independently and can be toggled on or off with their own easy-access footswitches, each paired with its own LED light to indicate its current activation status. Furthermore, both effects can also be used simultaneously, empowering guitarists to experiment with unique tri-octave guitar presets.


However, these subjacent and upper octave effects need not be explicit if the guitarist using the Tender Octaver X2 is looking for a more subtle octave manipulation. Thanks to the octave volume dials and the "Direct" dial for dry signal volume adjustment, anything from an explicit pitch shift to a subtle octave underlay can be achieved within the same pedal.


The pedal also contains 14 preset slots, allowing users to experiment and save their favourite parameter combinations with the "Save" button. In classic MOOER fashion, this has been presented in a minimalistic fashion, with 7 LED lights representing the full range of 14 save slots, lighting up blue or red depending on which half of the slots are being browsed. Each slot can be saved into or browsed through the two "Sub" and "Upper" foot switches, providing a further example of MOOER's dedication to making the most out of a minimalistic interface.




Using the pedal will be as simple as plugging it into the included DC 9V power supply, and plugging in a guitar with a standard 1/4" guitar cable. Overall, the Tender Octave X2 is set to be an exciting new addition to MOOER's octave pedal catalogue, and if paired with the "Pure" or "Purer" Octave products, just about any pitch-shift combination is made possible for guitarists of any style or experience level.


Features:
Precise octave-shifting DSP algorithm
Two octave effect options - subjacent and upper
Two effect volume dials, one for each octave
A 'Direct' dial for adjusting the dry signal volume
14 unique user preset slots
A dual-function 'Save' button for presets
7 dual-colour preset LEDs, with red representing one half of presets, and blue representing the other half
Two additional LEDs, indicating the activation status of both octave effects
Two foot switches that function both independently and simultaneously for effect toggling and preset browsing
1/4" mono input and output
DC 9V power supply
Minimalistic and compact casing design

A universe of effects
The only pedal you’ll ever need. Each of the onboard effects contained within this box sounds superbly authentic and defined. A bright, clear screen and super simple control interface let you easily navigate through each effect type and function on the pedal – find your perfect rig in seconds. With 70 high quality amp models at your fingertips, you’ll be able to get your hands on a wealth of different tones.

MOOER has been impressing musicians with its unique effect pedals for over a decade, and the new MVP3 Loopation is set to continue this trend. It's a versatile and feature-packed pedal designed to enable musicians to create seamless loops with their voice and instruments and is part of MOOER's recent VP series which provides versatile support for microphone input.

Loopation provides 11 save slots for recorded audio loops, with 8 of these slots featuring 5 minutes of recording time, and the other three having 10 minutes. Slots can be selected with the simple 'song' dial, and once audio has been recorded, the files will automatically save onto the device. The pedal offers two recording modes: real-time, and auto.

Recording in real-time mode is activated when the right footswitch is pressed, in the same style as traditional loop pedals. In contrast, the auto mode enters standby when the right footswitch is pressed and begins recording once signal is detected, stopping recording with another press.


When playback is stopped, users can delete all recorded layers by holding the right footswitch for 1 second, or by holding the second 'stop' footswitch press. Finally, users can undo their dubs by holding the left footswitch whilst an overdub is playing and can complete this motion again to restore this deleted layer. If the musician wishes to reverse the audio file, this can be achieved through a single left footswitch press.

Loopation provides both XLR and 1/4" inputs, which can be used in either 'mixed' or 'individual' mode. Users can toggle between these modes by holding the right footswitch while plugging in the power supply. In mixed mode, both inputs will be active, which can be balanced using the 'mix' dial, whereas, in individual mode, the input signals will be isolated to their respective outputs. The master dial allows users to adjust the overall volume of both outputs.

Amazingly, Loopation augments these features further with built-in reverb and tonal effects. By holding the 'tone' button whilst rotating the 'master' dial, the reverb volume can be adjusted. The tone button can also be used independently to switch between the pedal's three tone modes: flat, warm, and bright.

Finally, Loopation offers a gain adjustment knob, a 48V phantom power switch tailored for internal microphone amplification, a grounding switch, a line-in switch, and a DC 9V 500mA power input. When combined with the impressive looping features of the pedal, musicians are left with a complete toolkit for full compositional processes, whether this is in the studio, at home, or during a live performance.
11 loop memory slots with up to 70 minutes of recording time
Unlimited overdubs within each memory slot

Features for overdubbing, deleting, undoing, redoing, and reversing recordings
Built-in volume-adjustable reverb module
Dial for adjusting volume balance between XLR and " input
Master volume dial
Dual-functionality LED button
Two multi-functional footswitches
Two output modes: mixed and individual
XLR input and output
1/4" input and output
Internal 48V Phantom Power amplification
48V Phantom Power toggle switch
Line in toggle switch
Gain dial
Ground/Lift toggle switch
DC IN 9V 500mA power input

MOOER is well known for producing highly versatile multi-effect pedals, but its latest product announcement, the Prime Stomp S1, is not just a multi-effect pedal. It is an all-in-one pedalboard for guitar effects and tones, looping, and music production, complete with a unique portability-focused design.

Initially, guitarists will be impressed by its 126 internal guitar effects and tone presets, which are editable, sharable, and downloadable through the MOOER Cloud platform, fostering unlimited tonal flexibility. However, these capabilities shine particularly brightly when combined with the pedal's recording features.

This includes a looper module, which facilitates up to 80 seconds of looping, whilst also providing functionality for real-time playback, loop deletion, and overdubbing. Loops and arrangements can also be recorded directly onto a mobile phone or tablet through a USB/OTG cable.

When combined with the pedal's 40 synchronisable drum machines, 10 metronomes, and tuner, these looping and recording capabilities empower guitarists to craft complete musical arrangements within a single unified pedalboard, without the need for studio equipment. All features can be controlled by four simple foot switches, making for a powerfully minimalist user experience.

Whilst MOOER offers several pedalboards that offer similar functionality, the Prime Stomp S1 stands out due to its focus on portability. Instead of being powered by a mains power supply, it is powered solely by an integrated lithium battery. This battery is charged by a USB C port, enabling users to charge the pedal with a portable power bank, laptop, or regular USB C charger. The device also weighs just 350g, making it effortless to carry in a backpack.


Whilst the Prime Stomp 1 primarily caters to traveling musicians, it still includes industry-standard pedal features, such as a 1/4" input, stereo 1/4" outputs, and an independent headphone output. All of these features are presented in a sleek case and are visualized by MOOER's signature digital LED display, making for an unbeatable unified toolkit for traveling guitarists.
128 guitar effect and tone presets
80-second looping module
40 synchronisable drum machines
10 metronomes
Internal digital tuner
4 multi-function foot  switches
LED digital display
LED charge indicator
Portable USB/OTG recording
Compatibility with the MOOER Cloud preset sharing platform
USB C-powered Lithium battery
Up to 4.5 hours duration
Light-weight and portable design
Stereo 1/4" outputs
Mono 1/4" input
Independent headphone output
Master gain dial