Mooer Guitar Vocal Loopation Looper Pedal MVP3
£114.99 Inc. Vat
MOOER has been impressing musicians with its unique effect pedals for over a decade, and the new MVP3 Loopation is set to continue this trend. It’s a versatile and feature-packed pedal designed to enable musicians to create seamless loops with their voice and instruments and is part of MOOER’s recent VP series which provides versatile support for microphone input.
Loopation provides 11 save slots for recorded audio loops, with 8 of these slots featuring 5 minutes of recording time, and the other three having 10 minutes. Slots can be selected with the simple ‘song’ dial, and once audio has been recorded, the files will automatically save onto the device. The pedal offers two recording modes: real-time, and auto.
Recording in real-time mode is activated when the right footswitch is pressed, in the same style as traditional loop pedals. In contrast, the auto mode enters standby when the right footswitch is pressed and begins recording once signal is detected, stopping recording with another press.
When playback is stopped, users can delete all recorded layers by holding the right footswitch for 1 second, or by holding the second ‘stop’ footswitch press. Finally, users can undo their dubs by holding the left footswitch whilst an overdub is playing and can complete this motion again to restore this deleted layer. If the musician wishes to reverse the audio file, this can be achieved through a single left footswitch press.
Loopation provides both XLR and 1/4″ inputs, which can be used in either ‘mixed’ or ‘individual’ mode. Users can toggle between these modes by holding the right footswitch while plugging in the power supply. In mixed mode, both inputs will be active, which can be balanced using the ‘mix’ dial, whereas, in individual mode, the input signals will be isolated to their respective outputs. The master dial allows users to adjust the overall volume of both outputs.
Amazingly, Loopation augments these features further with built-in reverb and tonal effects. By holding the ‘tone’ button whilst rotating the ‘master’ dial, the reverb volume can be adjusted. The tone button can also be used independently to switch between the pedal’s three tone modes: flat, warm, and bright.
Finally, Loopation offers a gain adjustment knob, a 48V phantom power switch tailored for internal microphone amplification, a grounding switch, a line-in switch, and a DC 9V 500mA power input. When combined with the impressive looping features of the pedal, musicians are left with a complete toolkit for full compositional processes, whether this is in the studio, at home, or during a live performance.
11 loop memory slots with up to 70 minutes of recording time
Unlimited overdubs within each memory slot
Features for overdubbing, deleting, undoing, redoing, and reversing recordings
Built-in volume-adjustable reverb module
Dial for adjusting volume balance between XLR and ” input
Master volume dial
Dual-functionality LED button
Two multi-functional footswitches
Two output modes: mixed and individual
XLR input and output
1/4″ input and output
Internal 48V Phantom Power amplification
48V Phantom Power toggle switch
Line in toggle switch
Gain dial
Ground/Lift toggle switch
DC IN 9V 500mA power input
1 in stock
MOOER has been impressing musicians with its unique effect pedals for over a decade, and the new MVP3 Loopation is set to continue this trend. It’s a versatile and feature-packed pedal designed to enable musicians to create seamless loops with their voice and instruments and is part of MOOER’s recent VP series which provides versatile support for microphone input.
Loopation provides 11 save slots for recorded audio loops, with 8 of these slots featuring 5 minutes of recording time, and the other three having 10 minutes. Slots can be selected with the simple ‘song’ dial, and once audio has been recorded, the files will automatically save onto the device. The pedal offers two recording modes: real-time, and auto.
Recording in real-time mode is activated when the right footswitch is pressed, in the same style as traditional loop pedals. In contrast, the auto mode enters standby when the right footswitch is pressed and begins recording once signal is detected, stopping recording with another press.
When playback is stopped, users can delete all recorded layers by holding the right footswitch for 1 second, or by holding the second ‘stop’ footswitch press. Finally, users can undo their dubs by holding the left footswitch whilst an overdub is playing and can complete this motion again to restore this deleted layer. If the musician wishes to reverse the audio file, this can be achieved through a single left footswitch press.
Loopation provides both XLR and 1/4″ inputs, which can be used in either ‘mixed’ or ‘individual’ mode. Users can toggle between these modes by holding the right footswitch while plugging in the power supply. In mixed mode, both inputs will be active, which can be balanced using the ‘mix’ dial, whereas, in individual mode, the input signals will be isolated to their respective outputs. The master dial allows users to adjust the overall volume of both outputs.
Amazingly, Loopation augments these features further with built-in reverb and tonal effects. By holding the ‘tone’ button whilst rotating the ‘master’ dial, the reverb volume can be adjusted. The tone button can also be used independently to switch between the pedal’s three tone modes: flat, warm, and bright.
Finally, Loopation offers a gain adjustment knob, a 48V phantom power switch tailored for internal microphone amplification, a grounding switch, a line-in switch, and a DC 9V 500mA power input. When combined with the impressive looping features of the pedal, musicians are left with a complete toolkit for full compositional processes, whether this is in the studio, at home, or during a live performance.
11 loop memory slots with up to 70 minutes of recording time
Unlimited overdubs within each memory slot
Features for overdubbing, deleting, undoing, redoing, and reversing recordings
Built-in volume-adjustable reverb module
Dial for adjusting volume balance between XLR and ” input
Master volume dial
Dual-functionality LED button
Two multi-functional footswitches
Two output modes: mixed and individual
XLR input and output
1/4″ input and output
Internal 48V Phantom Power amplification
48V Phantom Power toggle switch
Line in toggle switch
Gain dial
Ground/Lift toggle switch
DC IN 9V 500mA power input
| Weight | 0.4 kg |
|---|
Only logged in customers who have purchased this product may leave a review.
Related products
Mooer Electric Guitar Purer Octave Pedal MOC4
Purer Octave provides guitarists with 15 different polyphonic octave effect combinations in addition to one detune effect. The DSP algorithm separates the high and low input frequencies to ensure every preset operates seamlessly without spectral artefacts or distortions. These two frequency bands can be isolated or combined dynamically through the independent "SUB" and "UPPER" dials, allowing guitarists to finely craft the perfect effect to suit their specific needs.
Despite the minimalistic interface, Purer Octave users can still save their own presets by using the pedal's three-way toggle switch. Guitarists can choose whether to use the pedal's dials in real-time to craft their sound and once they are satisfied with the effect, they can leverage the three-way switch to save their favourite effects. Bypassing the effect simply requires a foot press from the guitarist, the status of which is indicated via an LED light.
Purer Octave is presented within a compact pedal case with a glossy orange finish, complete with an intuitive and tidy user interface. The pedal provides a standardized quarter inch mono input and output, powered by a 9V DC power port. These features ensure that Purer Octave can be used on the move by any guitarist, offering a truly flexible and intuitive product for octave effect perfection.
1 detune effect mode
Three-way toggle switch offering a real-time effect mode and 2 preset slots
Independent volume dials for isolated sub and upper octave voice
Bypass foot-switch
Industry-standard quarter inch mono input and output
Glossy orange finish
Tidy and intuitive user interface
LED light indicator of bypass status
9V DC power port
SPECIFICATION
INPUT: quarter inch mono audio jack (impedance value 470k Ohms)
OUTPUT: quarter inch mono audio jack (impedance value 100 Ohms)
Power supply: 9V DC (center negative)
Current draw: 120mA
Dimension: 93.5(D) 42(W) 52mm(H)
Weight: 157g
Mooer Electric Guitar Tender Octaver X2 Pedal MX2OCTAVE
Unlike the Pure and Purer Octave pedals which focus on pitch-shifting by the semitone, the Tender Octaver X2 is designed with a more specialized intention, focussing solely on octave shifts. When using the pedal, users can choose between two different octave shift modes, facilitating the addition of both subjacent and upper frequencies to a guitar signal. Both options have two dedicated rotatable dials, one for determining the volume of the added octave, and one for fine-tuning its tonal colour.
Both of these octave effects can be used independently and can be toggled on or off with their own easy-access footswitches, each paired with its own LED light to indicate its current activation status. Furthermore, both effects can also be used simultaneously, empowering guitarists to experiment with unique tri-octave guitar presets.
However, these subjacent and upper octave effects need not be explicit if the guitarist using the Tender Octaver X2 is looking for a more subtle octave manipulation. Thanks to the octave volume dials and the "Direct" dial for dry signal volume adjustment, anything from an explicit pitch shift to a subtle octave underlay can be achieved within the same pedal.
The pedal also contains 14 preset slots, allowing users to experiment and save their favourite parameter combinations with the "Save" button. In classic MOOER fashion, this has been presented in a minimalistic fashion, with 7 LED lights representing the full range of 14 save slots, lighting up blue or red depending on which half of the slots are being browsed. Each slot can be saved into or browsed through the two "Sub" and "Upper" foot switches, providing a further example of MOOER's dedication to making the most out of a minimalistic interface.
Using the pedal will be as simple as plugging it into the included DC 9V power supply, and plugging in a guitar with a standard 1/4" guitar cable. Overall, the Tender Octave X2 is set to be an exciting new addition to MOOER's octave pedal catalogue, and if paired with the "Pure" or "Purer" Octave products, just about any pitch-shift combination is made possible for guitarists of any style or experience level.
Features:
Precise octave-shifting DSP algorithm
Two octave effect options - subjacent and upper
Two effect volume dials, one for each octave
A 'Direct' dial for adjusting the dry signal volume
14 unique user preset slots
A dual-function 'Save' button for presets
7 dual-colour preset LEDs, with red representing one half of presets, and blue representing the other half
Two additional LEDs, indicating the activation status of both octave effects
Two foot switches that function both independently and simultaneously for effect toggling and preset browsing
1/4" mono input and output
DC 9V power supply
Minimalistic and compact casing design
Mooer GE100 Multi Effects Guitar Processor Pedal OFFICIAL UK SUPPLIER
FX Module
The GE100’s FX Module is loaded with 10 different effect types, providing excellent versatility. The Compressor controls the signal’s dynamics by lowering the high-level peaks and increasing the low-level peaks, whilst the Pure Boost effect creates Mooer’s popular Pure Boost pedal and the E.L. Flanger delivers a swirling and spacey sound that is familiar of an aeroplane. The Tremolo effect delivers volume fluctuations that range from subtle to dramatic; Phaser offers a shimmering and twisting sound; the Pedal Wah is controlled by the expression pedal and the Auto Monkey offers an automatic wah effect without the expression pedal control. The Touch Wah effect adjusts with the input intensity, the Slow Engine delivers a sound that is familiar of a violin and cuts off the attack, and finally the Drop Bit offers a range of sampling rate and depth reduction.
Mooer GE250 Electric Guitar Multi Effects Pedal USB
A universe of effects
The only pedal you’ll ever need. Each of the onboard effects contained within this box sounds superbly authentic and defined. A bright, clear screen and super simple control interface let you easily navigate through each effect type and function on the pedal – find your perfect rig in seconds. With 70 high quality amp models at your fingertips, you’ll be able to get your hands on a wealth of different tones.
Mooer Guitar Effects Pedal Reverie Chorus Pro Twin MTWINCH1
Mooer Reverie Chorus Product
The Reverie Chrous is a Twin chorus pedal from Mooer. The pedal has 5 different onboard chorus effects (chorus, rotary, ambiance, shimmer and multiple,) each with 10 special modes.
Each chorus effect can be modulated with the onboard knobs; RATE, DEPTH, MIX, SPEED, RANGE and MOD DEPTH. There’s also the option to add Wah, Phaser, Talk, Tremolo, Stutter, Stutter Wah, Stutter Phaser, Tremolo Talk for even more sounds.
Brand: MOOER
Manufacturer Part Number: MTWINCH1
Collection: Mooer Twin Series Pedals
Mooer Harmonier Vocal Pedal MVP2
At its core, the pedal offers a versatile pitch harmonizer effect. The 'Key' dial allows users to choose to harmonize their important with any note in the chromatic scale, with the 'Sharp' LED button being used to select sharp notes. Once chosen, the 'Mode' dial facilitates further customization, offering 11 different harmony modes that control the harmony's interval. This includes all classic intervals such as octaves, fifths, and thirds.
The 'Level' dial adjusts the volume of the harmonizer effect, but Harmonier offers even further tonal flexibility thanks to its reverb function. Users can press and hold the 'Sharp' button while rotating the 'Level' dial, which allows them to adjust the volume of the pedal's internal reverb module. The pedal also offers tone modes: flat, warm, and bright. These can be controlled by activating the pedal's unique 'hidden mode' and using the 'sharp' button.
'Hidden mode' is activated by pressing and holding both of the pedal's footswitches, but this is just one example of Harmonier's unique control system. The left footswitch can be held to save effect presets, and pressed to scroll through 7 preset slots. The right footswitch can be pressed to turn on the pedal's effects, pressed again to isolate the reverb, and held to turn off all effects except for the tone setting.
Alongside its fundamental functionalities, the pedal features a gain dial, a 48V phantom power switch designed for internal microphone amplification, a grounding switch, and a DC 9V 500mA power input. Collectively, the MVP2 Harmonier's features guarantee that both vocalists and guitarists have all the necessary tools to augment their instrument's sounds with stunning harmonies, without ever having to worry about the pedal's batteries running low.
12 pitches with 11 different harmony mode
11 harmony modes that provide different harmonic intervals
High-quality internal reverb module with adjustable volume
3 tone modes: flat, warm, and bright
7 preset slots
Dual-functionality LED button
Two multi-functional footswitches
Customizable effect, tone, and reverb isolation
Two output modes: mixed and individual
XLR input and output
1/4" input and output
Internal 48V Phantom Power amplification
48V Phantom Power toggle switch for condenser microphones
Line in toggle switch for instruments and dynamic microphone
Gain dial
Ground/Lift toggle switch
DC IN 9V 500mA power input
Reviews
There are no reviews yet.