Vic Firth Bluetooth Isolation Headphones VXHP0012
£74.99 Inc. Vat
VXHP0012 Vic Firth Bluetooth Isolation Headphones
The Vic Firth Bluetooth Isolation Headphones are high-quality stereo headphones, which reduce outside noise levels so you can tune into the music. Offering superb stereo sound, these wireless headphones provide a full and tight low end, clean midrange and clear high end. Perfect for live, studio or practice, the broad foam cushions provide maximum comfort for any use. The 500mA built-in rechargeable battery provides approximately 20 hours of use. Using Bluetooth technology, these headphones connect wirelessly to enabled devices, and include a 3.5mm cable and 1/4in adapter for optional wired usage. These are the ideal headphones for any drummer looking for reliable, high-quality hearing protection.
SPECIFICATIONS
Weight
Approx. 55g
Speaker Type
50mm Dynamic Speaker Mylarcon
Impedance
32 ohm +/- 15%
Microphone
Condenser Microphone
Sound Pressure Level
112db +/- 3 db (1mw at 1kHZ)
Normal Rated Power
20mw
Max Power
30mw
Frequency Response
20HZ – 20KHZ
Cables
150cm +/- detachable with 3.5mm line-in cable and 14″ adapter
Bluetooth Chip
5.0
Latency Value
250ms
Battery
500mA built-in rechargeable battery
Battery Life
20 working hours (approx.)
1 in stock
VXHP0012 Vic Firth Bluetooth Isolation Headphones
The Vic Firth Bluetooth Isolation Headphones are high-quality stereo headphones, which reduce outside noise levels so you can tune into the music. Offering superb stereo sound, these wireless headphones provide a full and tight low end, clean midrange and clear high end. Perfect for live, studio or practice, the broad foam cushions provide maximum comfort for any use. The 500mA built-in rechargeable battery provides approximately 20 hours of use. Using Bluetooth technology, these headphones connect wirelessly to enabled devices, and include a 3.5mm cable and 1/4in adapter for optional wired usage. These are the ideal headphones for any drummer looking for reliable, high-quality hearing protection.
SPECIFICATIONS
Weight
Approx. 55g
Speaker Type
50mm Dynamic Speaker Mylarcon
Impedance
32 ohm +/- 15%
Microphone
Condenser Microphone
Sound Pressure Level
112db +/- 3 db (1mw at 1kHZ)
Normal Rated Power
20mw
Max Power
30mw
Frequency Response
20HZ – 20KHZ
Cables
150cm +/- detachable with 3.5mm line-in cable and 14″ adapter
Bluetooth Chip
5.0
Latency Value
250ms
Battery
500mA built-in rechargeable battery
Battery Life
20 working hours (approx.)
| Weight | 0.5 kg |
|---|
Only logged in customers who have purchased this product may leave a review.
Related products
Stagg Dynamic Vocal Microphone 50″ Style SDMP40 CR
Multipurpose 50s style cardioid dynamic microphone
Uses: Vocal and instrumental
Cartridge: DC66, moving coil
Polar pattern: Cardioid
Sensitivity: – 53 dB +/- 3 dB (0 dB = 1 V / Pa at 1 KHz)
Frequency response: 40 Hz to 12 KHz
Output impedance: 300 ohms 30 % (at 1 KHz)
Connector: XLR output
Body: Plastic
Cable: 3.5 m (11′), XLR to phone plug 6.35 mm (1/4″)
Switch: On / off
Colour: Chrome
Weight: 264 g (0.58 lb)
Comes with: Microphone holder with thread adapter (5/8″ to 3/8″)
Stagg SDMP10 Dynamic Microphone With Cable
Multipurpose cardioid dynamic microphone
Uses: Vocal and instrumental
Cartridge: DC98, moving coil
Polar pattern: Cardioid
Sensitivity: – 54 dB +/- 3 dB (0 dB = 1 V / Pa at 1 KHz)
Frequency response: 50 Hz to 15 KHz
Output impedance: 600 ohms 30 % (at 1 KHz)
Connector: XLR output
Body: Plastic
Cable: 3.5 m (11′), XLR to 1/4” (6.35 mm) phone plug
Switch: On / off
Colour: Charcoal grey with a black windscreen
Cable: 3.5 m (11′), XLR to 1/4” (6.35 mm) phone plug
Reviews
There are no reviews yet.